Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Fontana Homeowners
A new driveway gate in Fontana typically costs between $3,800 and $12,500 installed, depending on the gate material, width, automation package, and whether the existing posts can be reused. Most installations take one to two days on site once materials arrive, and we provide a written price before any work begins. Call (951) 476-1539 to schedule a free on-site measure and walkthrough.
We’ve installed gates across Fontana since 2014, from the newer subdivisions north of Summit Avenue to the older lots near Sierra Lakes and the industrial edges along Valley Boulevard. Adrian Vance started this company doing commercial access-control integration, then brought that documentation discipline to residential gate work. Every installation leaves you with a written scope, a written price, and a photographic record of what was set, what was wired, and what was installed. No verbal estimate. No surprise line item at the end.
Our technicians are background-checked and uniformed. You’ll know the name and face of the person arriving before they ring the bell. And a live person answers the phone at (951) 476-1539 at any hour, because a gate that won’t close at 2 a.m. is a problem that can’t wait for business hours.
Key Takeaways
- Typical Fontana gate installation runs $3,800 to $12,500, with a written price delivered before work starts.
- We install driveway, pedestrian, sliding, swing, double, and security gates, and we service nine automation brands including LiftMaster, DoorKing, and Elite.
- Every installation is covered by our 365-Day Done Right Promise: if the work isn’t right, we make it right at no charge within one year.
- We install in Fontana plus Rialto, Bloomington, Rancho Cucamonga, Ontario, Eastvale, Riverside, and surrounding Inland Empire communities.
What Our Gate Installation Service Includes
Every installation starts with a site visit, not a phone guess. We measure the opening, check the soil for post depth, confirm the uphill and downhill grade, look at where the control box will live, and count the existing conduits. Then we hand you a written price. Here’s what each gate type involves in a Fontana installation.
Driveway Gate
A Driveway Gate is the most common installation we do in Fontana, and the one with the widest price spread because the variables add up fast: single or double leaf, steel or aluminum, slide or swing, manual or automated. We install both pedestrian-access driveway gates and full vehicle-width gates, and we match the gate to the driveway grade rather than forcing a design that’ll drag on the first rain. When we’re done, you get a photo log of the post settings, hinge welds, motor mounts, and limit positions.
Most Fontana driveway gate installations land between $4,200 and $11,000 complete. That includes the gate structure, posts, hinges, automation if specified, safety edges or photo-eyes, and a full test sequence. If you already have a gate and need it replaced, we assess whether the existing posts can be reused before quoting, because some Fontana homes have steel posts set in concrete that are still perfectly good.
Pedestrian Gate
A Pedestrian Gate is the walk-through gate beside or within a larger driveway gate, and it’s a job smaller companies often decline because it’s detail work: tight tolerances, latch alignment, self-closing hardware. We install pedestrian gates as standalone entries and as part of a full driveway gate package. On a standalone pedestrian gate, we set the posts, hang the gate, install the latch and closer, and adjust everything so it closes latched without slamming.
For a vehicle gate with an integrated walk gate, the pedestrian leaf needs its own magnetic lock or electromagnetic interlock in many cases, and we run that wiring to the main control board with a separate zone. That way opening the walk gate doesn’t trigger the vehicle gate cycle. Expect a standalone pedestrian gate installation in Fontana to run $1,800 to $4,600 depending on width, material, and automation.
Sliding Gate
Sliding gates are the right call for Fontana properties with short driveways that slope up from the street, where a swing gate would need to fight the grade. We install cantilever slide gates for lighter-duty residential use and V-track slide gates where the gate is heavier or wider. A cantilever slide gate rolls on rollers without touching the ground, which means no track to clog with the gravel and leaf litter that collects along Fontana property lines.
We check the setbacks before we quote, because a sliding gate needs a clear travel path along the fence line. On installations we run the motor, set the rack, wire the safety edges and photo-eyes, and test the obstacle-reverse function at multiple points along travel. A typical residential sliding gate installation in Fontana runs $4,800 to $12,500, with the upper range reflecting longer gates and heavier steel.
Swing Gate
Swing gates are the most common gate type in Fontana, especially on standard flat lots where the gate opens inward or outward over a level drive. We install single and double-leaf swing gates in steel, aluminum, and ornamental wrought-style designs, and we pay close attention to hinge spec: a sagging gate is almost always a hinge problem, not a frame problem. We set the posts, weld or bolt the hinges per the manufacturer’s spec, hang the leaves, and fine-tune the closing speed so the gate seats without slamming.
On automated swing gates, we also install the articulating arm or underground operator, depending on the gate weight and the look you want. Underground swing operators cost more but leave a cleaner sightline, and they’re popular in Fontana’s gated communities. Swing gate installation typically runs $3,800 to $9,500, with double-leaf configurations at the top of that range.
Double Gate
A double gate is simply a two-leaf gate, most often a driveway gate where the opening is extra wide, or where look of symmetry matters more than a single large leaf. We install double swing gates and double slide gates, and we’ve done our share of double gates in Fontana backyards where a trailer or an RV needs access. The technical challenge on any double gate is leaf synchronization: both leaves need to start and stop without a clash, and the center stop must be set so the gate doesn’t bind.
We handle that with limit-setting at each operator and, where the control board supports it, master-slave programming so one leaf waits a beat before moving. Double gate installation in Fontana typically runs $5,500 to $12,500 depending on width, material, and automation package. That includes both operators on an automated system and the full safety sensor array on each leaf.
Security Gate
A security gate is a driveway or pedestrian gate specified for access control: card readers, keypads, intercoms, vehicle detectors, weight ratings that allow rapid cycling. In Fontana, we install security gates on both residential properties and light-commercial sites, and the work follows the same documentation standard we use on access-control projects: wiring diagrams, photos of every termination, and a written record of every setpoint.
Security gate installations always include safety edges and photo-eyes on both sides, plus a battery backup on the operator wherever the client needs the gate to cycle during a power outage. We program the access devices, test fail-safe and fail-secure behavior, and hand over a wiring diagram with the job record. Security gate installation in Fontana starts around $6,500 and runs upward from there based on the access control package and gate size.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterBrands We Service for Gate Installation
We install and service LiftMaster gate operators regularly across Fontana, including the LA400 and LA500 swing arms and the SL3000 slide operators. LiftMaster is the brand most Fontana homeowners already have on their garage side, so the app integration is familiar: one myQ account manages the garage door and the gate. We stock LiftMaster OEM parts and program the operators per the manual’s limit and force settings, not by feel.
DoorKing shows up often on Fontana properties with older gates, because DoorKing operators have been a fixture in Southern California gate work for decades. We’ve installed and rebuilt DoorKing slide and swing operators, and we carry their control boards, loop detectors, and safety edge transmitters. Elite is another brand we work with regularly, especially on slide gates where their heavy-duty operators hold up well in the heat and dust we get in the Inland Empire. If you have a different brand on the gate when we arrive, that’s fine; we service nine automation brands and never steer a customer toward replacing a motor that’s still doing its job.
Whether you have a LiftMaster, DoorKing, Elite, or any other make on your property, our team can install and integrate the gate to work with what’s already there. We’d rather repair or match a working brand than sell a replacement you don’t need.
Signs You Need Gate Installation Right Now
- The gate is off its hinges or leaning more than an inch. A gate that leans puts stress on the operator, the hinges, and the mounting posts, and it worsens with every open-close cycle. If the gate has already pulled its hinges out of the post or the post is leaning, the fix is usually a new post and hinge set, not a repair.
- The old gate is rusted through at the bottom rail or welds. In Fontana’s alkaline soil and dry, hot summers, steel gates rust from the bottom up, especially where irrigation overspray hits the lower rail. Once the bottom rail or hinge weld has corroded through, patching is temporary; a new gate built for the conditions is the honest fix.
- The gate no longer matches your security or access needs. If your household added a car, a trailer, or a home-based business, the old gate may be too narrow, too slow, or too easy to bypass. A new gate with a modern operator, keypad, or intercom brings the access point up to the rest of the property’s standard.
- The operator keeps failing despite repeated repairs. If we’ve repaired the same operator three times in a year, the math has already turned against the repair. A new installation with a properly matched motor saves money over continuing to replace boards and arms on an underpowered or aged unit.
- You’re building new or remodeling and need a gate from scratch. New construction in Fontana often has no gate at all or a temporary chain-link setup. Installing the right gate during construction means the conduits, footings, and post positions all get done correctly the first time, before concrete and landscaping lock in the layout.
Our Gate Installation Process - Step by Step
- 1
Site measure and assessment. We visit the property, measure the opening, check the driveway grade in both directions, inspect the existing posts or footings, locate the power source, and discuss material and access control needs. You get a written scope and a clear set of options after this visit, not a verbal ballpark.
- 2
Written price and schedule. We hand you a written flat price for the entire installation before any work begins. This is Haven Standard Clause 1: the price is in writing, up front, and it doesn’t change unless you change the scope. We also schedule the installation date and material delivery in this step.
- 3
Post setting and structural work. On install day, we set the posts in concrete to the correct depth for the gate weight and soil, then level and brace everything. For a new gate, this is the step that determines whether the gate will still be square in five years. We photograph the post settings and footing before concrete goes in.
- 4
Gate hang, motor mount, and wiring. We hang the gate, install the hinges or rollers, mount the operator, run the low-voltage wiring through conduit, and terminate everything in a weatherproof control box. We set limits, force, and speed per the operator manual, and we test the safety edges and photo-eyes at multiple points along travel.
- 5
Final test and documentation. We run the gate through a full cycle test: obstacle reversal, edge trip, photo-eye interruption, manual release, and battery backup if installed. Then we walk you through the operation and hand over the documentation package: photo log, wiring diagram, part numbers, and the written record of every setpoint. The 365-Day Done Right Promise covers the work for a full year.
How Much Does Gate Installation Cost in Fontana?
A typical Gate Installation pricing in Fontana runs $3,800 to $12,500 complete for a driveway gate, with the spread driven by gate width, material, automation, and whether existing posts can be reused. A simple single swing gate with no automation can land near the bottom of that range, while a double-leaf sliding security gate with an operator, photo-eyes, safety edges, and a keypad will push toward the top. Pedestrian gates run $1,800 to $4,600 as standalone installations.
What affects the price most in Fontana is the soil. The same gate installed in two different Fontana neighborhoods can need different post depths and concrete volumes because of soil compaction and drainage. A gate on a side yard that collects runoff needs better footing than one on a raised driveway. We factor that into the written price after the site visit, not as a surprise change order later.
Here’s a quick reference for common installation scenarios in Fontana:
- Single swing gate, steel, no automation: $3,800 to $5,500
- Single swing gate with LiftMaster operator: $5,000 to $7,800
- Double swing gate with operators and safety edges: $6,500 to $11,000
- Sliding gate with operator and photo-eyes: $4,800 to $12,500
- Pedestrian gate with magnetic lock and keypad: $2,400 to $4,600
- Security gate with access control and battery backup: $6,500 to $14,000+
Every price is written and handed over before any work starts. You’ll never open an invoice that’s higher than the number you were quoted. And if another company quoted you something different, bring us the paperwork and we’ll review it at no cost and give you a straight comparison.
Gate Installation Near Fontana - Our Service Area
We install gates across Fontana and the surrounding Inland Empire, including Rialto, Bloomington, Rancho Cucamonga, Ontario, Eastvale, Riverside, Upland, Montclair, Rubidoux, Pedley, and Mira Loma. If you’re a few minutes from the Fontana city line, count us in. We schedule installations across the area daily, and the site measure is free. See our gate installation page for Fontana for neighborhood-specific details, or check our Rialto gate installation guide and Bloomington gate installation guide if you’re on the edge of Fontana and want to confirm coverage. We also serve the broader region from our home service area.
Serving Fontana, CA - Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Fontana
Gate installation is the process of setting new gate posts, hanging a driveway or pedestrian gate, mounting the operator if the gate is automated, wiring the safety devices, and testing the full system so it opens, closes, and reverses correctly. In Gate Installation - Fontana, we install swing, slide, double, and security gates in steel, aluminum, and ornamental configurations. Every installation includes a written price before work starts and a documented photo record when we’re done.
Most residential gate installations in Fontana take one to two days on site after materials arrive. The variable is concrete: post footings need to cure before a gate can be hung and fully tested, and in cooler months that can add a day. We’ll give you a firm schedule in the written scope, and we run the full test sequence before we call the job complete. Call (951) 476-1539 to confirm current scheduling.
A driveway gate installation in Fontana typically runs $3,800 to $12,500, and a pedestrian gate runs $1,800 to $4,600. The main cost drivers are gate width, material, whether automation is included, and whether the existing posts can be reused. You’ll get a written flat price after the free site measure, so the number doesn’t move after work begins. Call (951) 476-1539 for a free estimate.
Yes. We install and service LiftMaster, DoorKing, and Elite operators regularly, along with FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule. That means we can match whatever motor is already on your Fontana property, or install a new one that fits your gate and access control needs. We don’t push a replacement brand just because we stock it; we specify what the gate actually needs.
If your gate has failed and the property is unsecured, call (951) 476-1539 any time, day or night, and a live person will answer. Emergency situations are usually repair-first jobs to get the gate secured, followed by a planned installation if a replacement is the right call. On installation work, we schedule the measure and the install date; on a gate that won’t close, we move now to secure the opening.
Every installation is covered by our 365-Day Done Right Promise: if the work isn’t right, we make it right within one full year at no additional charge. Operator and gate hardware carry their manufacturer warranties, and we file those with your job record so the paperwork is there when you need it. The installation labor is on us for a year, no argument and no expiration dance.
Clear the work area on both sides of the gate opening so we have room for the posts, the gate leaves, and the operators. Move vehicles out of the driveway and let us know about any buried irrigation lines, landscape lighting, or pet fencing near the gate path. We handle the utility locate and the concrete work; you just need to give us a clear site and access to the electrical panel if we’re adding a new circuit for the operator. Call (951) 476-1539 and we’ll walk you through the prep list for your specific gate type.
Schedule Your Gate Installation Service in Fontana Today
Call (951) 476-1539 to schedule a free on-site measure and get a written price for your Fontana gate installation. A live person answers 24/7, and the estimate costs nothing. We’ll walk the site, hand you a written scope and price, and schedule the install when you’re ready.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Fontana since 2014.