Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Fontana Homeowners
A gate that grinds against the track, sags on its hinges, or stops responding to the remote is more than an inconvenience. It’s a security gap and a daily frustration. Vance Gate Repair has repaired and installed over 22,000 gates since 2014, every one with a written price handed over before any work starts. If your gate is acting up in Fontana, we’ll send a background-checked, uniformed technician to diagnose it, document what we find, and fix it right the first time. Call (951) 476-1539 any hour, day or night. A live person answers. No voicemail loop, no callback queue, no automated attendant.
What Our Gate Repair Service Includes
Gate repair covers a wide range of failures, from electrical faults in the motor to physical damage on the gate itself. The work breaks down into six common categories, and most service calls involve one or two of them at most. Here’s what each one actually means, when you need it, and what we do about it in Fontana.
Electric Gate Repair
Electric gate repair addresses the powered side of your gate: the motor, control board, limit switches, and the wiring that connects them. You need this when your gate stops mid-travel, opens but won’t close, or makes a humming sound without moving. Under the home diagnostic standard Vance has used since 2014, our technician opens the control box, records the limit-switch readings, and photographs the board before and after any work. The written record you receive shows exactly what was found and what was reset.
Automatic Gate Repair
Automatic gate repair is a broader term that includes the automation system: the remote controls, keypads, safety photo-eyes, and the operator arm itself. You need this when the gate ignores a working remote, reverses for no reason, or the keypad has stopped accepting codes. We service nine major automation brands, so we repair whatever motor is already on your property rather than steering you toward a replacement. Every visit ends with a documented photo log, including the part numbers installed, filed in the job record under Gate Repair in Fontana terms.
Hinge & Post Repair
Hinge & Post Repair handles the structural connection between the gate leaf and the fence or column it hangs from. You need this when the gate scrapes the ground, the hinges creak or show cracks, or the post itself has started to lean under the gate’s weight. Vance Gate Repair welds cracked hinge plates, replaces worn barrel hinges, and resets posts in fresh concrete when the base has shifted. We photograph the weld points and the post footing so you can see the repair, and so any future technician can see it too.
Gate Realignment
Gate Realignment corrects the gradual sag that comes from years of wind, daily use, and settling concrete. You need this when the latch no longer lines up with the receiver, or the gate drags against the driveway at one corner. Our technicians measure the gate’s hang with a level and adjust the hinge plates or install anti-sag kits where the frame allows. Realignment is one of the most common repairs we do in Fontana, and it’s usually completed in under two hours when the hinges are salvageable.
Lock Repair
Lock repair covers mechanical locks, magnetic locks, and the solenoid releases that tie into your automation system. You need this when the key turns but nothing moves, the mag-lock buzzes and won’t hold, or the gate can be pushed open without a code. We replace lock cylinders, adjust strike plates, and rewire solenoid releases to the control board so the gate locks and unlocks in sequence with the operator. The lock’s wiring path and the new cylinder code are both included in the written record we leave with you.
Weld & Rust Repair
Weld and rust repair restores the gate’s frame and pickets where corrosion or impact has compromised them. You need this when you can see through a rusted picket, or a weld bead has cracked at the frame corner. Vance Gate Repair grinds the damaged area back to clean steel, welds new material in place, and applies a rust-inhibiting primer matched to your gate’s finish. Under Haven Standard Clause 4, every weld repair is photographed at three stages: before grinding, after welding, and after finishing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
Most Fontana homes came with whatever gate operator the original builder or a previous owner installed. That means one house has a LiftMaster, the next one has a Linear, and the one after that has something nobody can identify. We work on all of it. Adrian Vance built Vance Gate Repair on commercial access-control sites starting in 2014, where the motor on the gate was never a choice, it was just the motor on the gate. That habit carried over into residential work.
DoorKing and Elite operators are common on larger residential and light commercial gates in Fontana, and we’ve rebuilt hundreds of them including control board swaps, limit-switch calibration, and loop detector work. Mighty Mule is common on lighter residential gates, and we stock their OEM parts including control boards, remotes, and photo-eyes. Whether you have a LiftMaster, a Ghost Controls, a FAAC, or any other make that still has a legible label, we provide Electric Gate Repair for it. We don’t steer anyone toward a replacement when a repair is the right call.
BeforeAfterSigns You Need Gate Repair Right Now
- The gate moves slower than it used to. A gradual slowdown is usually tired capacitor, low fluid in a hydraulic operator, or a motor losing torque. A gate that’s slower than it was six months ago is working harder than it should, and the motor is paying for it.
- The gate reverses immediately after closing. This is almost always a misaligned photo-eye (the infrared beam that stops the gate if something crosses the path) or an obstructed safety edge. A two-inch misalignment is enough to trigger a false reversal. Left unchecked, a homeowner starts disabling the safety system, and that creates a real hazard.
- The keypad accepts the code but nothing happens. The code is fine. The signal isn’t reaching the control board, or the board isn’t sending voltage to the operator. That’s a wiring fault or a failing relay, and it needs a meter, not a new remote.
- The gate scrapes the driveway on one side. Scraping means the gate has sagged, the hinge plates have worn, or the post has shifted. Every day it scrapes, the damage compounds. A gate that drags today is a gate that won’t close next month.
- You can hear the motor running, but the gate isn’t moving. That’s a disengaged operator, a stripped gear, or a broken drive chain. The motor thinks it’s working. The gate knows it isn’t. Running the motor in this state burns it out faster than any other single failure.
Our Gate Repair Process - Step by Step
- 1
You call, a person answers. You call (951) 476-1539 and a live dispatcher picks up, day or night. No automated attendant, no callback promise. We schedule a service window that actually works for you.
- 2
Your technician arrives with a name and a face. Before dispatch, we send you the technician’s name and photo. The technician is background-checked, uniformed, and carries the diagnostic tools for every automation brand we service.
- 3
Diagnosis with documentation. The technician opens the control box, photographs the wiring, tests voltage at the board, checks limit-switch positions, and inspects the mechanical hardware. Every reading is written down. Before any repair begins, you receive a written price for the exact work, not an estimate range. That’s Haven Standard Clause 1: Have it in writing.
- 4
The repair, done right. The technician completes the repair using OEM or equivalent parts, calibrates the operator to the manufacturer’s travel specs, and tests the full cycle including the safety systems. No black-box work. You see what was replaced.
- 5
The documented handoff. Before we leave, you get a photo log of every adjustment and a written record of every part number installed. The job record is filed at Vance Gate Repair. If anything is not right within 365 days, we make it right at no additional charge. That’s the 365-Day Done Right Promise.
How Much Does Gate Repair Cost in Fontana?
Gate repair costs in Fontana fall into predictable ranges, depending on the type of failure and the parts involved. A hinge replacement on a standard swing gate typically runs $220 to $480. A gate realignment usually costs $180 to $350. Replacing a photo-eye sensor runs $160 to $310. A control board replacement on a DoorKing or LiftMaster operator generally runs $410 to $750, including the board and programming. A full swing-gate motor replacement runs $850 to $1,600, depending on the brand and whether the arm bracket is intact.
What affects the price is parts, access, and the age of the system. OEM control boards cost more than universal boards. Gates set back into tight spaces take longer to work on. Older wiring may need to be re-run. You avoid overpaying by getting the written price before work starts, and by asking any company to put the number on paper. Vance Gate Repair does exactly that, and we’ll also review any written estimate from another company at no cost. The free estimate includes the diagnostic visit, the written price, and the photo record of what we found, whether you hire us or not.
Gate Repair Near Fontana - Our Service Area
Vance Gate Repair serves homes throughout the Inland Empire. Most Fontana service calls are reached within 60 to 90 minutes of dispatch. We also cover Gate Repair in Rialto, Gate Repair in Bloomington, Rancho Cucamonga, Ontario, Eastvale, Mira Loma, Pedley, Rubidoux, Upland, Montclair, and Riverside. If you’re within range and your gate is down, call and we’ll tell you exactly when a technician can be there.
Serving Fontana, CA - Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Fontana
Gate repair is the process of diagnosing and fixing a gate that won’t open, close, lock, or stay aligned. It includes work on the operator motor, control board, hinges, posts, locks, and the gate frame itself. At Vance Gate Repair, every Automatic Gate Repair in Fontana starts with a documented diagnosis and a written price before any tool is picked up.
Most gate repairs in Fontana are completed in one visit, typically between 90 minutes and 3 hours. Hinge replacements and realignments are usually on the shorter end. Control board replacements may take longer if programming and loop detector calibration are involved. We’ll give you a time estimate before we start the work, in writing, along with the price.
Gate repair in Fontana typically ranges from $180 for a basic realignment to $1,600 for a full swing-gate motor replacement. Hinge replacements run $220 to $480. Photo-eye replacements run $160 to $310. Control board replacements run $410 to $750. Every job gets a written price before work starts, so there are no surprises on the invoice. Call (951) 476-1539 for an exact quote, the estimate is free.
Yes. We service LiftMaster gate operators, along with DoorKing, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, and Ghost Controls. Our technicians are trained on each brand’s control board architecture and travel calibration, and we stock or can source OEM parts for LiftMaster residential and light commercial operators.
Yes. We dispatch technicians in Fontana seven days a week, and a live person answers the phone 24 hours a day. If your gate is stuck open, stuck closed, or won’t secure your property, call (951) 476-1539 and we’ll tell you exactly when a technician can arrive.
Every repair we complete is covered by the 365-Day Done Right Promise. If the repair is not right within one full year, Vance Gate Repair makes it right at no additional charge. No argument, no fee, no expiration date within that window. Parts installed are covered by the manufacturer’s warranty where applicable.
Clear access to the gate and the operator box is the main thing. If the operator is in a fenced enclosure or behind landscaping, clear a path to it. Have your remotes and keypad codes available for testing. Beyond that, you don’t need to do anything. We’ll handle the diagnosis, the documentation, and the repair. The written estimate and photo record are yours to keep either way.
Schedule Your Gate Repair Service in Fontana Today
Your gate is either securing your property or it isn’t. If it’s grinding, sagging, or dead, call (951) 476-1539 now. A live person answers 24/7. You’ll get a straightforward diagnosis, a written price before any work begins, and a documented photo record when we leave. The 365-Day Done Right Promise covers every repair. No pressure, no surprise invoice, just a gate that works the way it should.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Fontana since 2014.